Piñonario Power transmission toolsES
Bearings

Bearing size lookup by number

Type the number stamped on the bearing, or measure bore, outside diameter and width with a caliper, to know which bearing it is and how to order it in any brand.

Find a bearing

Type the number stamped on it or measure the bearing with a caliper.

Try:

d 25D 52B 15

6205-2RS C3

Single row deep groove ball bearing · 62 series (medium, the most common)

What the number means

  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6205-2Z6205-2RSH
FAG / Schaeffler6205-2ZR6205-2RSR
NSK6205-ZZ6205-DDU
NTN6205-ZZ6205-LLU
Koyo6205-ZZ6205-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Deep groove ball bearing size chart

Dimensions in mm: d = bore, D = outside diameter, B = width. Tap a number to see its data sheet with versions and equivalents.

618 series (ultra-thin section)
NumberdDB
680010195
680112215
680215245
680317265
680420327
680525377
680630427
680735477
680840527
680945587
681050657
619 series (thin section)
NumberdDB
690010226
690112246
690215287
690317307
690420379
690525429
690630479
6907355510
6908406212
6909456812
6910507212
60 series (light)
NumberdDB
600010268
600112288
600215329
6003173510
6004204212
6005254712
6006305513
6007356214
6008406815
6009457516
6010508016
6011559018
6012609518
60136510018
60147011020
60157511520
60168012522
60178513022
60189014024
60199514524
602010015024
62 series (medium, the most common)
NumberdDB
620010309
6201123210
6202153511
6203174012
6204204714
6205255215
6206306216
6207357217
6208408018
6209458519
6210509020
62115510021
62126011022
62136512023
62147012524
62157513025
62168014026
62178515028
62189016030
62199517032
622010018034
63 series (heavy)
NumberdDB
6300103511
6301123712
6302154213
6303174714
6304205215
6305256217
6306307219
6307358021
6308409023
63094510025
63105011027
63115512029
63126013031
63136514033
63147015035
63157516037
63168017039
63178518041
63189019043
63199520045
632010021547
miniature, 60 / 62 / 63 series
NumberdDB
6044124
6055145
6066176
6077196
6088227
6099247
6233104
6244135
6255165
6266196
6277227
6288248
6299268
6344165
6355196
6366227
6377269
6388289
63993010

FAQ

How do I find the bore size from the bearing number?

On 4-digit bearings, the last two digits times 5 give the bore in mm: 6205 → 05 × 5 = 25 mm. The exceptions are 00 = 10 mm, 01 = 12 mm, 02 = 15 mm and 03 = 17 mm. On 3-digit miniature bearings the last digit is the bore: 608 = 8 mm.

What is the difference between 2RS and ZZ?

ZZ (or 2Z) are metal shields: they keep out coarse dirt with no drag, so they allow higher rpm. 2RS (DDU, LLU, 2RSH depending on the brand) are rubber seals touching the inner ring: better against fine dust and water, with a bit more drag.

What does C3 mean?

The bearing has more internal clearance than normal. It is used with tight shaft fits or high running temperatures, for example in electric motors. If the original is C3, the replacement should be C3 too.

Is an SKF 6205 the same as an NSK or NTN 6205?

The size is: d, D and B are standardized (ISO 15) and identical in every brand. What changes is how seals and shields are named, and load ratings, grease or noise level may differ. Each data sheet shows how to order the same version in each brand.

Which key does the shaft need?

Use the keyway size calculator: from the shaft diameter it gives the key and keyseat with tolerances.