Piñonario Power transmission toolsES

Bearings / 634

634 bearing — 4 × 16 × 5 mm

Size 4 × 16 × 5 mm · single row deep groove ball bearing, miniature, 63 series. Dimensions are the same in every brand (ISO 15).

d 4D 16B 5
Dimensionsmminches
Bore (d)40.1575
Outside diameter (D)160.6299
Width (B)50.1969

How to read the number

63 = series · 4 = 4 mm bore (on miniature bearings the last digit is the bore).

Most common versions

VersionNumber
Open634
Metal shields634-2Z / ZZ
Rubber seals634-2RS / 2RSH / DDU / LLU
Snap ring groove634-N / NR
C3 clearance (motors)634 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF634-2Z634-2RSH
FAG / Schaeffler634-2ZR634-2RSR
NSK634-ZZ634-DDU
NTN634-ZZ634-LLU
Koyo634-ZZ634-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø4 j6 and housing Ø16 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Related bearings

Same bore (4 mm), other series: 604 (4×12×4) · 624 (4×13×5)

· 635 → (Next in the series)

Look up another bearing by number or size →