Piñonario Power transmission toolsES

Bearings / 635

635 bearing — 5 × 19 × 6 mm

Size 5 × 19 × 6 mm · single row deep groove ball bearing, miniature, 63 series. Dimensions are the same in every brand (ISO 15).

d 5D 19B 6
Dimensionsmminches
Bore (d)50.1969
Outside diameter (D)190.748
Width (B)60.2362

How to read the number

63 = series · 5 = 5 mm bore (on miniature bearings the last digit is the bore).

Most common versions

VersionNumber
Open635
Metal shields635-2Z / ZZ
Rubber seals635-2RS / 2RSH / DDU / LLU
Snap ring groove635-N / NR
C3 clearance (motors)635 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF635-2Z635-2RSH
FAG / Schaeffler635-2ZR635-2RSR
NSK635-ZZ635-DDU
NTN635-ZZ635-LLU
Koyo635-ZZ635-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø5 j6 and housing Ø19 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Related bearings

Same bore (5 mm), other series: 605 (5×14×5) · 625 (5×16×5)

← 634 (Previous in the series) · 636 → (Next in the series)

Look up another bearing by number or size →