Piñonario Power transmission toolsES

Bearings / 6003

6003 bearing — 17 × 35 × 10 mm

Size 17 × 35 × 10 mm · single row deep groove ball bearing, 60 series (light). Dimensions are the same in every brand (ISO 15).

d 17D 35B 10
Dimensionsmminches
Bore (d)170.6693
Outside diameter (D)351.378
Width (B)100.3937

How to read the number

60 = series · 03 = 17 mm bore (codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm).

Most common versions

VersionNumber
Open6003
Metal shields6003-2Z / ZZ
Rubber seals6003-2RS / 2RSH / DDU / LLU
Snap ring groove6003-N / NR
C3 clearance (motors)6003 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6003-2Z6003-2RSH
FAG / Schaeffler6003-2ZR6003-2RSR
NSK6003-ZZ6003-DDU
NTN6003-ZZ6003-LLU
Koyo6003-ZZ6003-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø17 j6 and housing Ø35 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 17 mm shaft? DIN 6885 calls for a 5 × 5 mm key →

Related bearings

Same bore (17 mm), other series: 6803 (17×26×5) · 6903 (17×30×7) · 6203 (17×40×12) · 6303 (17×47×14)

← 6002 (Previous in the series) · 6004 → (Next in the series)

Look up another bearing by number or size →