Piñonario Power transmission toolsES

Bearings / 6203

6203 bearing — 17 × 40 × 12 mm

Size 17 × 40 × 12 mm · single row deep groove ball bearing, 62 series (medium, the most common). Dimensions are the same in every brand (ISO 15).

d 17D 40B 12
Dimensionsmminches
Bore (d)170.6693
Outside diameter (D)401.5748
Width (B)120.4724

How to read the number

62 = series · 03 = 17 mm bore (codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm).

Most common versions

VersionNumber
Open6203
Metal shields6203-2Z / ZZ
Rubber seals6203-2RS / 2RSH / DDU / LLU
Snap ring groove6203-N / NR
C3 clearance (motors)6203 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6203-2Z6203-2RSH
FAG / Schaeffler6203-2ZR6203-2RSR
NSK6203-ZZ6203-DDU
NTN6203-ZZ6203-LLU
Koyo6203-ZZ6203-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø17 j6 and housing Ø40 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 17 mm shaft? DIN 6885 calls for a 5 × 5 mm key →

Related bearings

Same bore (17 mm), other series: 6803 (17×26×5) · 6903 (17×30×7) · 6003 (17×35×10) · 6303 (17×47×14)

← 6202 (Previous in the series) · 6204 → (Next in the series)

Look up another bearing by number or size →