Bearings / 6204
6204 bearing — 20 × 47 × 14 mm
Size 20 × 47 × 14 mm · single row deep groove ball bearing, 62 series (medium, the most common). Dimensions are the same in every brand (ISO 15).
| Dimensions | mm | inches |
|---|---|---|
| Bore (d) | 20 | 0.7874 |
| Outside diameter (D) | 47 | 1.8504 |
| Width (B) | 14 | 0.5512 |
How to read the number
62 = series · 04 × 5 = 20 mm bore.
Most common versions
| Version | Number |
|---|---|
| Open | 6204 |
| Metal shields | 6204-2Z / ZZ |
| Rubber seals | 6204-2RS / 2RSH / DDU / LLU |
| Snap ring groove | 6204-N / NR |
| C3 clearance (motors) | 6204 C3 |
- Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
- Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
- C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.
Brand equivalents
| Brand | With metal shields | With rubber seals |
|---|---|---|
| SKF | 6204-2Z | 6204-2RSH |
| FAG / Schaeffler | 6204-2ZR | 6204-2RSR |
| NSK | 6204-ZZ | 6204-DDU |
| NTN | 6204-ZZ | 6204-LLU |
| Koyo | 6204-ZZ | 6204-2RS |
Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.
Shaft and housing fit
Most common case, inner ring rotating with the shaft under normal load: shaft Ø20 k5 and housing Ø47 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.
Keyed 20 mm shaft? DIN 6885 calls for a 6 × 6 mm key →
Related bearings
Same bore (20 mm), other series: 6804 (20×32×7) · 6904 (20×37×9) · 6004 (20×42×12) · 6304 (20×52×15)
← 6203 (Previous in the series) · 6205 → (Next in the series)