Piñonario Power transmission toolsES

Bearings / 6804

6804 bearing — 20 × 32 × 7 mm

Size 20 × 32 × 7 mm · single row deep groove ball bearing, 618 series (ultra-thin section). Dimensions are the same in every brand (ISO 15).

d 20D 32B 7
Dimensionsmminches
Bore (d)200.7874
Outside diameter (D)321.2598
Width (B)70.2756

How to read the number

68 = series · 04 × 5 = 20 mm bore.

Most common versions

VersionNumber
Open6804
Metal shields6804-2Z / ZZ
Rubber seals6804-2RS / 2RSH / DDU / LLU
Snap ring groove6804-N / NR
C3 clearance (motors)6804 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6804-2Z6804-2RSH
FAG / Schaeffler6804-2ZR6804-2RSR
NSK6804-ZZ6804-DDU
NTN6804-ZZ6804-LLU
Koyo6804-ZZ6804-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø20 k5 and housing Ø32 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 20 mm shaft? DIN 6885 calls for a 6 × 6 mm key →

Related bearings

Same bore (20 mm), other series: 6904 (20×37×9) · 6004 (20×42×12) · 6204 (20×47×14) · 6304 (20×52×15)

← 6803 (Previous in the series) · 6805 → (Next in the series)

Look up another bearing by number or size →