Piñonario Power transmission toolsES

Bearings / 6904

6904 bearing — 20 × 37 × 9 mm

Size 20 × 37 × 9 mm · single row deep groove ball bearing, 619 series (thin section). Dimensions are the same in every brand (ISO 15).

d 20D 37B 9
Dimensionsmminches
Bore (d)200.7874
Outside diameter (D)371.4567
Width (B)90.3543

How to read the number

69 = series · 04 × 5 = 20 mm bore.

Most common versions

VersionNumber
Open6904
Metal shields6904-2Z / ZZ
Rubber seals6904-2RS / 2RSH / DDU / LLU
Snap ring groove6904-N / NR
C3 clearance (motors)6904 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6904-2Z6904-2RSH
FAG / Schaeffler6904-2ZR6904-2RSR
NSK6904-ZZ6904-DDU
NTN6904-ZZ6904-LLU
Koyo6904-ZZ6904-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø20 k5 and housing Ø37 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 20 mm shaft? DIN 6885 calls for a 6 × 6 mm key →

Related bearings

Same bore (20 mm), other series: 6804 (20×32×7) · 6004 (20×42×12) · 6204 (20×47×14) · 6304 (20×52×15)

← 6903 (Previous in the series) · 6905 → (Next in the series)

Look up another bearing by number or size →