Piñonario Power transmission toolsES

Bearings / 6905

6905 bearing — 25 × 42 × 9 mm

Size 25 × 42 × 9 mm · single row deep groove ball bearing, 619 series (thin section). Dimensions are the same in every brand (ISO 15).

d 25D 42B 9
Dimensionsmminches
Bore (d)250.9843
Outside diameter (D)421.6535
Width (B)90.3543

How to read the number

69 = series · 05 × 5 = 25 mm bore.

Most common versions

VersionNumber
Open6905
Metal shields6905-2Z / ZZ
Rubber seals6905-2RS / 2RSH / DDU / LLU
Snap ring groove6905-N / NR
C3 clearance (motors)6905 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6905-2Z6905-2RSH
FAG / Schaeffler6905-2ZR6905-2RSR
NSK6905-ZZ6905-DDU
NTN6905-ZZ6905-LLU
Koyo6905-ZZ6905-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø25 k5 and housing Ø42 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 25 mm shaft? DIN 6885 calls for a 8 × 7 mm key →

Related bearings

Same bore (25 mm), other series: 6805 (25×37×7) · 6005 (25×47×12) · 6205 (25×52×15) · 6305 (25×62×17)

← 6904 (Previous in the series) · 6906 → (Next in the series)

Look up another bearing by number or size →