Piñonario Power transmission toolsES

Bearings / 6219

6219 bearing — 95 × 170 × 32 mm

Size 95 × 170 × 32 mm · single row deep groove ball bearing, 62 series (medium, the most common). Dimensions are the same in every brand (ISO 15).

d 95D 170B 32
Dimensionsmminches
Bore (d)953.7402
Outside diameter (D)1706.6929
Width (B)321.2598

How to read the number

62 = series · 19 × 5 = 95 mm bore.

Most common versions

VersionNumber
Open6219
Metal shields6219-2Z / ZZ
Rubber seals6219-2RS / 2RSH / DDU / LLU
Snap ring groove6219-N / NR
C3 clearance (motors)6219 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6219-2Z6219-2RSH
FAG / Schaeffler6219-2ZR6219-2RSR
NSK6219-ZZ6219-DDU
NTN6219-ZZ6219-LLU
Koyo6219-ZZ6219-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø95 k5 and housing Ø170 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 95 mm shaft? DIN 6885 calls for a 25 × 14 mm key →

Related bearings

Same bore (95 mm), other series: 6019 (95×145×24) · 6319 (95×200×45)

← 6218 (Previous in the series) · 6220 → (Next in the series)

Look up another bearing by number or size →