Bearings / 6220
6220 bearing — 100 × 180 × 34 mm
Size 100 × 180 × 34 mm · single row deep groove ball bearing, 62 series (medium, the most common). Dimensions are the same in every brand (ISO 15).
| Dimensions | mm | inches |
|---|---|---|
| Bore (d) | 100 | 3.937 |
| Outside diameter (D) | 180 | 7.0866 |
| Width (B) | 34 | 1.3386 |
How to read the number
62 = series · 20 × 5 = 100 mm bore.
Most common versions
| Version | Number |
|---|---|
| Open | 6220 |
| Metal shields | 6220-2Z / ZZ |
| Rubber seals | 6220-2RS / 2RSH / DDU / LLU |
| Snap ring groove | 6220-N / NR |
| C3 clearance (motors) | 6220 C3 |
- Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
- Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
- C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.
Brand equivalents
| Brand | With metal shields | With rubber seals |
|---|---|---|
| SKF | 6220-2Z | 6220-2RSH |
| FAG / Schaeffler | 6220-2ZR | 6220-2RSR |
| NSK | 6220-ZZ | 6220-DDU |
| NTN | 6220-ZZ | 6220-LLU |
| Koyo | 6220-ZZ | 6220-2RS |
Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.
Shaft and housing fit
Most common case, inner ring rotating with the shaft under normal load: shaft Ø100 k5 and housing Ø180 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.
Keyed 100 mm shaft? DIN 6885 calls for a 28 × 16 mm key →
Related bearings
Same bore (100 mm), other series: 6020 (100×150×24) · 6320 (100×215×47)
← 6219 (Previous in the series)