Piñonario Power transmission toolsES

Bearings / 6320

6320 bearing — 100 × 215 × 47 mm

Size 100 × 215 × 47 mm · single row deep groove ball bearing, 63 series (heavy). Dimensions are the same in every brand (ISO 15).

d 100D 215B 47
Dimensionsmminches
Bore (d)1003.937
Outside diameter (D)2158.4646
Width (B)471.8504

How to read the number

63 = series · 20 × 5 = 100 mm bore.

Most common versions

VersionNumber
Open6320
Metal shields6320-2Z / ZZ
Rubber seals6320-2RS / 2RSH / DDU / LLU
Snap ring groove6320-N / NR
C3 clearance (motors)6320 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6320-2Z6320-2RSH
FAG / Schaeffler6320-2ZR6320-2RSR
NSK6320-ZZ6320-DDU
NTN6320-ZZ6320-LLU
Koyo6320-ZZ6320-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø100 k5 and housing Ø215 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 100 mm shaft? DIN 6885 calls for a 28 × 16 mm key →

Related bearings

Same bore (100 mm), other series: 6020 (100×150×24) · 6220 (100×180×34)

← 6319 (Previous in the series)

Look up another bearing by number or size →