Piñonario Power transmission toolsES

Bearings / 6020

6020 bearing — 100 × 150 × 24 mm

Size 100 × 150 × 24 mm · single row deep groove ball bearing, 60 series (light). Dimensions are the same in every brand (ISO 15).

d 100D 150B 24
Dimensionsmminches
Bore (d)1003.937
Outside diameter (D)1505.9055
Width (B)240.9449

How to read the number

60 = series · 20 × 5 = 100 mm bore.

Most common versions

VersionNumber
Open6020
Metal shields6020-2Z / ZZ
Rubber seals6020-2RS / 2RSH / DDU / LLU
Snap ring groove6020-N / NR
C3 clearance (motors)6020 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6020-2Z6020-2RSH
FAG / Schaeffler6020-2ZR6020-2RSR
NSK6020-ZZ6020-DDU
NTN6020-ZZ6020-LLU
Koyo6020-ZZ6020-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø100 k5 and housing Ø150 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 100 mm shaft? DIN 6885 calls for a 28 × 16 mm key →

Related bearings

Same bore (100 mm), other series: 6220 (100×180×34) · 6320 (100×215×47)

← 6019 (Previous in the series)

Look up another bearing by number or size →