Bearings / 6019
6019 bearing — 95 × 145 × 24 mm
Size 95 × 145 × 24 mm · single row deep groove ball bearing, 60 series (light). Dimensions are the same in every brand (ISO 15).
| Dimensions | mm | inches |
|---|---|---|
| Bore (d) | 95 | 3.7402 |
| Outside diameter (D) | 145 | 5.7087 |
| Width (B) | 24 | 0.9449 |
How to read the number
60 = series · 19 × 5 = 95 mm bore.
Most common versions
| Version | Number |
|---|---|
| Open | 6019 |
| Metal shields | 6019-2Z / ZZ |
| Rubber seals | 6019-2RS / 2RSH / DDU / LLU |
| Snap ring groove | 6019-N / NR |
| C3 clearance (motors) | 6019 C3 |
- Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
- Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
- C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.
Brand equivalents
| Brand | With metal shields | With rubber seals |
|---|---|---|
| SKF | 6019-2Z | 6019-2RSH |
| FAG / Schaeffler | 6019-2ZR | 6019-2RSR |
| NSK | 6019-ZZ | 6019-DDU |
| NTN | 6019-ZZ | 6019-LLU |
| Koyo | 6019-ZZ | 6019-2RS |
Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.
Shaft and housing fit
Most common case, inner ring rotating with the shaft under normal load: shaft Ø95 k5 and housing Ø145 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.
Keyed 95 mm shaft? DIN 6885 calls for a 25 × 14 mm key →
Related bearings
Same bore (95 mm), other series: 6219 (95×170×32) · 6319 (95×200×45)
← 6018 (Previous in the series) · 6020 → (Next in the series)