Bearings / 6018
6018 bearing — 90 × 140 × 24 mm
Size 90 × 140 × 24 mm · single row deep groove ball bearing, 60 series (light). Dimensions are the same in every brand (ISO 15).
| Dimensions | mm | inches |
|---|---|---|
| Bore (d) | 90 | 3.5433 |
| Outside diameter (D) | 140 | 5.5118 |
| Width (B) | 24 | 0.9449 |
How to read the number
60 = series · 18 × 5 = 90 mm bore.
Most common versions
| Version | Number |
|---|---|
| Open | 6018 |
| Metal shields | 6018-2Z / ZZ |
| Rubber seals | 6018-2RS / 2RSH / DDU / LLU |
| Snap ring groove | 6018-N / NR |
| C3 clearance (motors) | 6018 C3 |
- Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
- Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
- C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.
Brand equivalents
| Brand | With metal shields | With rubber seals |
|---|---|---|
| SKF | 6018-2Z | 6018-2RSH |
| FAG / Schaeffler | 6018-2ZR | 6018-2RSR |
| NSK | 6018-ZZ | 6018-DDU |
| NTN | 6018-ZZ | 6018-LLU |
| Koyo | 6018-ZZ | 6018-2RS |
Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.
Shaft and housing fit
Most common case, inner ring rotating with the shaft under normal load: shaft Ø90 k5 and housing Ø140 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.
Keyed 90 mm shaft? DIN 6885 calls for a 25 × 14 mm key →
Related bearings
Same bore (90 mm), other series: 6218 (90×160×30) · 6318 (90×190×43)
← 6017 (Previous in the series) · 6019 → (Next in the series)