Piñonario Power transmission toolsES

Bearings / 6318

6318 bearing — 90 × 190 × 43 mm

Size 90 × 190 × 43 mm · single row deep groove ball bearing, 63 series (heavy). Dimensions are the same in every brand (ISO 15).

d 90D 190B 43
Dimensionsmminches
Bore (d)903.5433
Outside diameter (D)1907.4803
Width (B)431.6929

How to read the number

63 = series · 18 × 5 = 90 mm bore.

Most common versions

VersionNumber
Open6318
Metal shields6318-2Z / ZZ
Rubber seals6318-2RS / 2RSH / DDU / LLU
Snap ring groove6318-N / NR
C3 clearance (motors)6318 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6318-2Z6318-2RSH
FAG / Schaeffler6318-2ZR6318-2RSR
NSK6318-ZZ6318-DDU
NTN6318-ZZ6318-LLU
Koyo6318-ZZ6318-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø90 k5 and housing Ø190 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 90 mm shaft? DIN 6885 calls for a 25 × 14 mm key →

Related bearings

Same bore (90 mm), other series: 6018 (90×140×24) · 6218 (90×160×30)

← 6317 (Previous in the series) · 6319 → (Next in the series)

Look up another bearing by number or size →