Bearings / 6317
6317 bearing — 85 × 180 × 41 mm
Size 85 × 180 × 41 mm · single row deep groove ball bearing, 63 series (heavy). Dimensions are the same in every brand (ISO 15).
| Dimensions | mm | inches |
|---|---|---|
| Bore (d) | 85 | 3.3465 |
| Outside diameter (D) | 180 | 7.0866 |
| Width (B) | 41 | 1.6142 |
How to read the number
63 = series · 17 × 5 = 85 mm bore.
Most common versions
| Version | Number |
|---|---|
| Open | 6317 |
| Metal shields | 6317-2Z / ZZ |
| Rubber seals | 6317-2RS / 2RSH / DDU / LLU |
| Snap ring groove | 6317-N / NR |
| C3 clearance (motors) | 6317 C3 |
- Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
- Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
- C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.
Brand equivalents
| Brand | With metal shields | With rubber seals |
|---|---|---|
| SKF | 6317-2Z | 6317-2RSH |
| FAG / Schaeffler | 6317-2ZR | 6317-2RSR |
| NSK | 6317-ZZ | 6317-DDU |
| NTN | 6317-ZZ | 6317-LLU |
| Koyo | 6317-ZZ | 6317-2RS |
Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.
Shaft and housing fit
Most common case, inner ring rotating with the shaft under normal load: shaft Ø85 k5 and housing Ø180 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.
Keyed 85 mm shaft? DIN 6885 calls for a 22 × 14 mm key →
Related bearings
Same bore (85 mm), other series: 6017 (85×130×22) · 6217 (85×150×28)
← 6316 (Previous in the series) · 6318 → (Next in the series)