Bearings / 6017
6017 bearing — 85 × 130 × 22 mm
Size 85 × 130 × 22 mm · single row deep groove ball bearing, 60 series (light). Dimensions are the same in every brand (ISO 15).
| Dimensions | mm | inches |
|---|---|---|
| Bore (d) | 85 | 3.3465 |
| Outside diameter (D) | 130 | 5.1181 |
| Width (B) | 22 | 0.8661 |
How to read the number
60 = series · 17 × 5 = 85 mm bore.
Most common versions
| Version | Number |
|---|---|
| Open | 6017 |
| Metal shields | 6017-2Z / ZZ |
| Rubber seals | 6017-2RS / 2RSH / DDU / LLU |
| Snap ring groove | 6017-N / NR |
| C3 clearance (motors) | 6017 C3 |
- Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
- Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
- C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.
Brand equivalents
| Brand | With metal shields | With rubber seals |
|---|---|---|
| SKF | 6017-2Z | 6017-2RSH |
| FAG / Schaeffler | 6017-2ZR | 6017-2RSR |
| NSK | 6017-ZZ | 6017-DDU |
| NTN | 6017-ZZ | 6017-LLU |
| Koyo | 6017-ZZ | 6017-2RS |
Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.
Shaft and housing fit
Most common case, inner ring rotating with the shaft under normal load: shaft Ø85 k5 and housing Ø130 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.
Keyed 85 mm shaft? DIN 6885 calls for a 22 × 14 mm key →
Related bearings
Same bore (85 mm), other series: 6217 (85×150×28) · 6317 (85×180×41)
← 6016 (Previous in the series) · 6018 → (Next in the series)