Piñonario Power transmission toolsES

Bearings / 6312

6312 bearing — 60 × 130 × 31 mm

Size 60 × 130 × 31 mm · single row deep groove ball bearing, 63 series (heavy). Dimensions are the same in every brand (ISO 15).

d 60D 130B 31
Dimensionsmminches
Bore (d)602.3622
Outside diameter (D)1305.1181
Width (B)311.2205

How to read the number

63 = series · 12 × 5 = 60 mm bore.

Most common versions

VersionNumber
Open6312
Metal shields6312-2Z / ZZ
Rubber seals6312-2RS / 2RSH / DDU / LLU
Snap ring groove6312-N / NR
C3 clearance (motors)6312 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6312-2Z6312-2RSH
FAG / Schaeffler6312-2ZR6312-2RSR
NSK6312-ZZ6312-DDU
NTN6312-ZZ6312-LLU
Koyo6312-ZZ6312-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø60 k5 and housing Ø130 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 60 mm shaft? DIN 6885 calls for a 18 × 11 mm key →

Related bearings

Same bore (60 mm), other series: 6012 (60×95×18) · 6212 (60×110×22)

← 6311 (Previous in the series) · 6313 → (Next in the series)

Look up another bearing by number or size →