Piñonario Power transmission toolsES

Bearings / 6313

6313 bearing — 65 × 140 × 33 mm

Size 65 × 140 × 33 mm · single row deep groove ball bearing, 63 series (heavy). Dimensions are the same in every brand (ISO 15).

d 65D 140B 33
Dimensionsmminches
Bore (d)652.5591
Outside diameter (D)1405.5118
Width (B)331.2992

How to read the number

63 = series · 13 × 5 = 65 mm bore.

Most common versions

VersionNumber
Open6313
Metal shields6313-2Z / ZZ
Rubber seals6313-2RS / 2RSH / DDU / LLU
Snap ring groove6313-N / NR
C3 clearance (motors)6313 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6313-2Z6313-2RSH
FAG / Schaeffler6313-2ZR6313-2RSR
NSK6313-ZZ6313-DDU
NTN6313-ZZ6313-LLU
Koyo6313-ZZ6313-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø65 k5 and housing Ø140 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 65 mm shaft? DIN 6885 calls for a 18 × 11 mm key →

Related bearings

Same bore (65 mm), other series: 6013 (65×100×18) · 6213 (65×120×23)

← 6312 (Previous in the series) · 6314 → (Next in the series)

Look up another bearing by number or size →