Piñonario Power transmission toolsES

Bearings / 6013

6013 bearing — 65 × 100 × 18 mm

Size 65 × 100 × 18 mm · single row deep groove ball bearing, 60 series (light). Dimensions are the same in every brand (ISO 15).

d 65D 100B 18
Dimensionsmminches
Bore (d)652.5591
Outside diameter (D)1003.937
Width (B)180.7087

How to read the number

60 = series · 13 × 5 = 65 mm bore.

Most common versions

VersionNumber
Open6013
Metal shields6013-2Z / ZZ
Rubber seals6013-2RS / 2RSH / DDU / LLU
Snap ring groove6013-N / NR
C3 clearance (motors)6013 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6013-2Z6013-2RSH
FAG / Schaeffler6013-2ZR6013-2RSR
NSK6013-ZZ6013-DDU
NTN6013-ZZ6013-LLU
Koyo6013-ZZ6013-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø65 k5 and housing Ø100 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 65 mm shaft? DIN 6885 calls for a 18 × 11 mm key →

Related bearings

Same bore (65 mm), other series: 6213 (65×120×23) · 6313 (65×140×33)

← 6012 (Previous in the series) · 6014 → (Next in the series)

Look up another bearing by number or size →