Bearings / 6314
6314 bearing — 70 × 150 × 35 mm
Size 70 × 150 × 35 mm · single row deep groove ball bearing, 63 series (heavy). Dimensions are the same in every brand (ISO 15).
| Dimensions | mm | inches |
|---|---|---|
| Bore (d) | 70 | 2.7559 |
| Outside diameter (D) | 150 | 5.9055 |
| Width (B) | 35 | 1.378 |
How to read the number
63 = series · 14 × 5 = 70 mm bore.
Most common versions
| Version | Number |
|---|---|
| Open | 6314 |
| Metal shields | 6314-2Z / ZZ |
| Rubber seals | 6314-2RS / 2RSH / DDU / LLU |
| Snap ring groove | 6314-N / NR |
| C3 clearance (motors) | 6314 C3 |
- Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
- Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
- C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.
Brand equivalents
| Brand | With metal shields | With rubber seals |
|---|---|---|
| SKF | 6314-2Z | 6314-2RSH |
| FAG / Schaeffler | 6314-2ZR | 6314-2RSR |
| NSK | 6314-ZZ | 6314-DDU |
| NTN | 6314-ZZ | 6314-LLU |
| Koyo | 6314-ZZ | 6314-2RS |
Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.
Shaft and housing fit
Most common case, inner ring rotating with the shaft under normal load: shaft Ø70 k5 and housing Ø150 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.
Keyed 70 mm shaft? DIN 6885 calls for a 20 × 12 mm key →
Related bearings
Same bore (70 mm), other series: 6014 (70×110×20) · 6214 (70×125×24)
← 6313 (Previous in the series) · 6315 → (Next in the series)