Piñonario Power transmission toolsES

Bearings / 6214

6214 bearing — 70 × 125 × 24 mm

Size 70 × 125 × 24 mm · single row deep groove ball bearing, 62 series (medium, the most common). Dimensions are the same in every brand (ISO 15).

d 70D 125B 24
Dimensionsmminches
Bore (d)702.7559
Outside diameter (D)1254.9213
Width (B)240.9449

How to read the number

62 = series · 14 × 5 = 70 mm bore.

Most common versions

VersionNumber
Open6214
Metal shields6214-2Z / ZZ
Rubber seals6214-2RS / 2RSH / DDU / LLU
Snap ring groove6214-N / NR
C3 clearance (motors)6214 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6214-2Z6214-2RSH
FAG / Schaeffler6214-2ZR6214-2RSR
NSK6214-ZZ6214-DDU
NTN6214-ZZ6214-LLU
Koyo6214-ZZ6214-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø70 k5 and housing Ø125 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 70 mm shaft? DIN 6885 calls for a 20 × 12 mm key →

Related bearings

Same bore (70 mm), other series: 6014 (70×110×20) · 6314 (70×150×35)

← 6213 (Previous in the series) · 6215 → (Next in the series)

Look up another bearing by number or size →