Piñonario Power transmission toolsES

Bearings / 6215

6215 bearing — 75 × 130 × 25 mm

Size 75 × 130 × 25 mm · single row deep groove ball bearing, 62 series (medium, the most common). Dimensions are the same in every brand (ISO 15).

d 75D 130B 25
Dimensionsmminches
Bore (d)752.9528
Outside diameter (D)1305.1181
Width (B)250.9843

How to read the number

62 = series · 15 × 5 = 75 mm bore.

Most common versions

VersionNumber
Open6215
Metal shields6215-2Z / ZZ
Rubber seals6215-2RS / 2RSH / DDU / LLU
Snap ring groove6215-N / NR
C3 clearance (motors)6215 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6215-2Z6215-2RSH
FAG / Schaeffler6215-2ZR6215-2RSR
NSK6215-ZZ6215-DDU
NTN6215-ZZ6215-LLU
Koyo6215-ZZ6215-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø75 k5 and housing Ø130 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 75 mm shaft? DIN 6885 calls for a 20 × 12 mm key →

Related bearings

Same bore (75 mm), other series: 6015 (75×115×20) · 6315 (75×160×37)

← 6214 (Previous in the series) · 6216 → (Next in the series)

Look up another bearing by number or size →