Piñonario Power transmission toolsES

Bearings / 6311

6311 bearing — 55 × 120 × 29 mm

Size 55 × 120 × 29 mm · single row deep groove ball bearing, 63 series (heavy). Dimensions are the same in every brand (ISO 15).

d 55D 120B 29
Dimensionsmminches
Bore (d)552.1654
Outside diameter (D)1204.7244
Width (B)291.1417

How to read the number

63 = series · 11 × 5 = 55 mm bore.

Most common versions

VersionNumber
Open6311
Metal shields6311-2Z / ZZ
Rubber seals6311-2RS / 2RSH / DDU / LLU
Snap ring groove6311-N / NR
C3 clearance (motors)6311 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6311-2Z6311-2RSH
FAG / Schaeffler6311-2ZR6311-2RSR
NSK6311-ZZ6311-DDU
NTN6311-ZZ6311-LLU
Koyo6311-ZZ6311-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø55 k5 and housing Ø120 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 55 mm shaft? DIN 6885 calls for a 16 × 10 mm key →

Related bearings

Same bore (55 mm), other series: 6011 (55×90×18) · 6211 (55×100×21)

← 6310 (Previous in the series) · 6312 → (Next in the series)

Look up another bearing by number or size →