Piñonario Power transmission toolsES

Bearings / 6211

6211 bearing — 55 × 100 × 21 mm

Size 55 × 100 × 21 mm · single row deep groove ball bearing, 62 series (medium, the most common). Dimensions are the same in every brand (ISO 15).

d 55D 100B 21
Dimensionsmminches
Bore (d)552.1654
Outside diameter (D)1003.937
Width (B)210.8268

How to read the number

62 = series · 11 × 5 = 55 mm bore.

Most common versions

VersionNumber
Open6211
Metal shields6211-2Z / ZZ
Rubber seals6211-2RS / 2RSH / DDU / LLU
Snap ring groove6211-N / NR
C3 clearance (motors)6211 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6211-2Z6211-2RSH
FAG / Schaeffler6211-2ZR6211-2RSR
NSK6211-ZZ6211-DDU
NTN6211-ZZ6211-LLU
Koyo6211-ZZ6211-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø55 k5 and housing Ø100 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 55 mm shaft? DIN 6885 calls for a 16 × 10 mm key →

Related bearings

Same bore (55 mm), other series: 6011 (55×90×18) · 6311 (55×120×29)

← 6210 (Previous in the series) · 6212 → (Next in the series)

Look up another bearing by number or size →