Piñonario Power transmission toolsES

Bearings / 6210

6210 bearing — 50 × 90 × 20 mm

Size 50 × 90 × 20 mm · single row deep groove ball bearing, 62 series (medium, the most common). Dimensions are the same in every brand (ISO 15).

d 50D 90B 20
Dimensionsmminches
Bore (d)501.9685
Outside diameter (D)903.5433
Width (B)200.7874

How to read the number

62 = series · 10 × 5 = 50 mm bore.

Most common versions

VersionNumber
Open6210
Metal shields6210-2Z / ZZ
Rubber seals6210-2RS / 2RSH / DDU / LLU
Snap ring groove6210-N / NR
C3 clearance (motors)6210 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6210-2Z6210-2RSH
FAG / Schaeffler6210-2ZR6210-2RSR
NSK6210-ZZ6210-DDU
NTN6210-ZZ6210-LLU
Koyo6210-ZZ6210-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø50 k5 and housing Ø90 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 50 mm shaft? DIN 6885 calls for a 14 × 9 mm key →

Related bearings

Same bore (50 mm), other series: 6810 (50×65×7) · 6910 (50×72×12) · 6010 (50×80×16) · 6310 (50×110×27)

← 6209 (Previous in the series) · 6211 → (Next in the series)

Look up another bearing by number or size →