Piñonario Power transmission toolsES

Bearings / 6910

6910 bearing — 50 × 72 × 12 mm

Size 50 × 72 × 12 mm · single row deep groove ball bearing, 619 series (thin section). Dimensions are the same in every brand (ISO 15).

d 50D 72B 12
Dimensionsmminches
Bore (d)501.9685
Outside diameter (D)722.8346
Width (B)120.4724

How to read the number

69 = series · 10 × 5 = 50 mm bore.

Most common versions

VersionNumber
Open6910
Metal shields6910-2Z / ZZ
Rubber seals6910-2RS / 2RSH / DDU / LLU
Snap ring groove6910-N / NR
C3 clearance (motors)6910 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6910-2Z6910-2RSH
FAG / Schaeffler6910-2ZR6910-2RSR
NSK6910-ZZ6910-DDU
NTN6910-ZZ6910-LLU
Koyo6910-ZZ6910-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø50 k5 and housing Ø72 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 50 mm shaft? DIN 6885 calls for a 14 × 9 mm key →

Related bearings

Same bore (50 mm), other series: 6810 (50×65×7) · 6010 (50×80×16) · 6210 (50×90×20) · 6310 (50×110×27)

← 6909 (Previous in the series)

Look up another bearing by number or size →