Piñonario Power transmission toolsES

Bearings / 6810

6810 bearing — 50 × 65 × 7 mm

Size 50 × 65 × 7 mm · single row deep groove ball bearing, 618 series (ultra-thin section). Dimensions are the same in every brand (ISO 15).

d 50D 65B 7
Dimensionsmminches
Bore (d)501.9685
Outside diameter (D)652.5591
Width (B)70.2756

How to read the number

68 = series · 10 × 5 = 50 mm bore.

Most common versions

VersionNumber
Open6810
Metal shields6810-2Z / ZZ
Rubber seals6810-2RS / 2RSH / DDU / LLU
Snap ring groove6810-N / NR
C3 clearance (motors)6810 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6810-2Z6810-2RSH
FAG / Schaeffler6810-2ZR6810-2RSR
NSK6810-ZZ6810-DDU
NTN6810-ZZ6810-LLU
Koyo6810-ZZ6810-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø50 k5 and housing Ø65 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 50 mm shaft? DIN 6885 calls for a 14 × 9 mm key →

Related bearings

Same bore (50 mm), other series: 6910 (50×72×12) · 6010 (50×80×16) · 6210 (50×90×20) · 6310 (50×110×27)

← 6809 (Previous in the series)

Look up another bearing by number or size →