Piñonario Power transmission toolsES

Bearings / 6809

6809 bearing — 45 × 58 × 7 mm

Size 45 × 58 × 7 mm · single row deep groove ball bearing, 618 series (ultra-thin section). Dimensions are the same in every brand (ISO 15).

d 45D 58B 7
Dimensionsmminches
Bore (d)451.7717
Outside diameter (D)582.2835
Width (B)70.2756

How to read the number

68 = series · 09 × 5 = 45 mm bore.

Most common versions

VersionNumber
Open6809
Metal shields6809-2Z / ZZ
Rubber seals6809-2RS / 2RSH / DDU / LLU
Snap ring groove6809-N / NR
C3 clearance (motors)6809 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6809-2Z6809-2RSH
FAG / Schaeffler6809-2ZR6809-2RSR
NSK6809-ZZ6809-DDU
NTN6809-ZZ6809-LLU
Koyo6809-ZZ6809-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø45 k5 and housing Ø58 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 45 mm shaft? DIN 6885 calls for a 14 × 9 mm key →

Related bearings

Same bore (45 mm), other series: 6909 (45×68×12) · 6009 (45×75×16) · 6209 (45×85×19) · 6309 (45×100×25)

← 6808 (Previous in the series) · 6810 → (Next in the series)

Look up another bearing by number or size →