Piñonario Power transmission toolsES

Bearings / 6808

6808 bearing — 40 × 52 × 7 mm

Size 40 × 52 × 7 mm · single row deep groove ball bearing, 618 series (ultra-thin section). Dimensions are the same in every brand (ISO 15).

d 40D 52B 7
Dimensionsmminches
Bore (d)401.5748
Outside diameter (D)522.0472
Width (B)70.2756

How to read the number

68 = series · 08 × 5 = 40 mm bore.

Most common versions

VersionNumber
Open6808
Metal shields6808-2Z / ZZ
Rubber seals6808-2RS / 2RSH / DDU / LLU
Snap ring groove6808-N / NR
C3 clearance (motors)6808 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6808-2Z6808-2RSH
FAG / Schaeffler6808-2ZR6808-2RSR
NSK6808-ZZ6808-DDU
NTN6808-ZZ6808-LLU
Koyo6808-ZZ6808-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø40 k5 and housing Ø52 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 40 mm shaft? DIN 6885 calls for a 12 × 8 mm key →

Related bearings

Same bore (40 mm), other series: 6908 (40×62×12) · 6008 (40×68×15) · 6208 (40×80×18) · 6308 (40×90×23)

← 6807 (Previous in the series) · 6809 → (Next in the series)

Look up another bearing by number or size →