Piñonario Power transmission toolsES

Bearings / 6008

6008 bearing — 40 × 68 × 15 mm

Size 40 × 68 × 15 mm · single row deep groove ball bearing, 60 series (light). Dimensions are the same in every brand (ISO 15).

d 40D 68B 15
Dimensionsmminches
Bore (d)401.5748
Outside diameter (D)682.6772
Width (B)150.5906

How to read the number

60 = series · 08 × 5 = 40 mm bore.

Most common versions

VersionNumber
Open6008
Metal shields6008-2Z / ZZ
Rubber seals6008-2RS / 2RSH / DDU / LLU
Snap ring groove6008-N / NR
C3 clearance (motors)6008 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6008-2Z6008-2RSH
FAG / Schaeffler6008-2ZR6008-2RSR
NSK6008-ZZ6008-DDU
NTN6008-ZZ6008-LLU
Koyo6008-ZZ6008-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø40 k5 and housing Ø68 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 40 mm shaft? DIN 6885 calls for a 12 × 8 mm key →

Related bearings

Same bore (40 mm), other series: 6808 (40×52×7) · 6908 (40×62×12) · 6208 (40×80×18) · 6308 (40×90×23)

← 6007 (Previous in the series) · 6009 → (Next in the series)

Look up another bearing by number or size →