Piñonario Power transmission toolsES

Bearings / 6309

6309 bearing — 45 × 100 × 25 mm

Size 45 × 100 × 25 mm · single row deep groove ball bearing, 63 series (heavy). Dimensions are the same in every brand (ISO 15).

d 45D 100B 25
Dimensionsmminches
Bore (d)451.7717
Outside diameter (D)1003.937
Width (B)250.9843

How to read the number

63 = series · 09 × 5 = 45 mm bore.

Most common versions

VersionNumber
Open6309
Metal shields6309-2Z / ZZ
Rubber seals6309-2RS / 2RSH / DDU / LLU
Snap ring groove6309-N / NR
C3 clearance (motors)6309 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6309-2Z6309-2RSH
FAG / Schaeffler6309-2ZR6309-2RSR
NSK6309-ZZ6309-DDU
NTN6309-ZZ6309-LLU
Koyo6309-ZZ6309-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø45 k5 and housing Ø100 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 45 mm shaft? DIN 6885 calls for a 14 × 9 mm key →

Related bearings

Same bore (45 mm), other series: 6809 (45×58×7) · 6909 (45×68×12) · 6009 (45×75×16) · 6209 (45×85×19)

← 6308 (Previous in the series) · 6310 → (Next in the series)

Look up another bearing by number or size →