Bearings / 623
623 bearing — 3 × 10 × 4 mm
Size 3 × 10 × 4 mm · single row deep groove ball bearing, miniature, 62 series. Dimensions are the same in every brand (ISO 15).
| Dimensions | mm | inches |
|---|---|---|
| Bore (d) | 3 | 0.1181 |
| Outside diameter (D) | 10 | 0.3937 |
| Width (B) | 4 | 0.1575 |
How to read the number
62 = series · 3 = 3 mm bore (on miniature bearings the last digit is the bore).
Most common versions
| Version | Number |
|---|---|
| Open | 623 |
| Metal shields | 623-2Z / ZZ |
| Rubber seals | 623-2RS / 2RSH / DDU / LLU |
| Snap ring groove | 623-N / NR |
| C3 clearance (motors) | 623 C3 |
- Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
- Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
- C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.
Brand equivalents
| Brand | With metal shields | With rubber seals |
|---|---|---|
| SKF | 623-2Z | 623-2RSH |
| FAG / Schaeffler | 623-2ZR | 623-2RSR |
| NSK | 623-ZZ | 623-DDU |
| NTN | 623-ZZ | 623-LLU |
| Koyo | 623-ZZ | 623-2RS |
Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.
Shaft and housing fit
Most common case, inner ring rotating with the shaft under normal load: shaft Ø3 j6 and housing Ø10 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.
Related bearings
· 624 → (Next in the series)