Piñonario Power transmission toolsES

Bearings / 6201

6201 bearing — 12 × 32 × 10 mm

Size 12 × 32 × 10 mm · single row deep groove ball bearing, 62 series (medium, the most common). Dimensions are the same in every brand (ISO 15).

d 12D 32B 10
Dimensionsmminches
Bore (d)120.4724
Outside diameter (D)321.2598
Width (B)100.3937

How to read the number

62 = series · 01 = 12 mm bore (codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm).

Most common versions

VersionNumber
Open6201
Metal shields6201-2Z / ZZ
Rubber seals6201-2RS / 2RSH / DDU / LLU
Snap ring groove6201-N / NR
C3 clearance (motors)6201 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6201-2Z6201-2RSH
FAG / Schaeffler6201-2ZR6201-2RSR
NSK6201-ZZ6201-DDU
NTN6201-ZZ6201-LLU
Koyo6201-ZZ6201-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø12 j6 and housing Ø32 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 12 mm shaft? DIN 6885 calls for a 4 × 4 mm key →

Related bearings

Same bore (12 mm), other series: 6801 (12×21×5) · 6901 (12×24×6) · 6001 (12×28×8) · 6301 (12×37×12)

← 6200 (Previous in the series) · 6202 → (Next in the series)

Look up another bearing by number or size →