Bearings / 6301
6301 bearing — 12 × 37 × 12 mm
Size 12 × 37 × 12 mm · single row deep groove ball bearing, 63 series (heavy). Dimensions are the same in every brand (ISO 15).
| Dimensions | mm | inches |
|---|---|---|
| Bore (d) | 12 | 0.4724 |
| Outside diameter (D) | 37 | 1.4567 |
| Width (B) | 12 | 0.4724 |
How to read the number
63 = series · 01 = 12 mm bore (codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm).
Most common versions
| Version | Number |
|---|---|
| Open | 6301 |
| Metal shields | 6301-2Z / ZZ |
| Rubber seals | 6301-2RS / 2RSH / DDU / LLU |
| Snap ring groove | 6301-N / NR |
| C3 clearance (motors) | 6301 C3 |
- Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
- Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
- C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.
Brand equivalents
| Brand | With metal shields | With rubber seals |
|---|---|---|
| SKF | 6301-2Z | 6301-2RSH |
| FAG / Schaeffler | 6301-2ZR | 6301-2RSR |
| NSK | 6301-ZZ | 6301-DDU |
| NTN | 6301-ZZ | 6301-LLU |
| Koyo | 6301-ZZ | 6301-2RS |
Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.
Shaft and housing fit
Most common case, inner ring rotating with the shaft under normal load: shaft Ø12 j6 and housing Ø37 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.
Keyed 12 mm shaft? DIN 6885 calls for a 4 × 4 mm key →
Related bearings
Same bore (12 mm), other series: 6801 (12×21×5) · 6901 (12×24×6) · 6001 (12×28×8) · 6201 (12×32×10)
← 6300 (Previous in the series) · 6302 → (Next in the series)