Piñonario Power transmission toolsES

Bearings / 6302

6302 bearing — 15 × 42 × 13 mm

Size 15 × 42 × 13 mm · single row deep groove ball bearing, 63 series (heavy). Dimensions are the same in every brand (ISO 15).

d 15D 42B 13
Dimensionsmminches
Bore (d)150.5906
Outside diameter (D)421.6535
Width (B)130.5118

How to read the number

63 = series · 02 = 15 mm bore (codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm).

Most common versions

VersionNumber
Open6302
Metal shields6302-2Z / ZZ
Rubber seals6302-2RS / 2RSH / DDU / LLU
Snap ring groove6302-N / NR
C3 clearance (motors)6302 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6302-2Z6302-2RSH
FAG / Schaeffler6302-2ZR6302-2RSR
NSK6302-ZZ6302-DDU
NTN6302-ZZ6302-LLU
Koyo6302-ZZ6302-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø15 j6 and housing Ø42 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 15 mm shaft? DIN 6885 calls for a 5 × 5 mm key →

Related bearings

Same bore (15 mm), other series: 6802 (15×24×5) · 6902 (15×28×7) · 6002 (15×32×9) · 6202 (15×35×11)

← 6301 (Previous in the series) · 6303 → (Next in the series)

Look up another bearing by number or size →