Piñonario Power transmission toolsES

Bearings / 6802

6802 bearing — 15 × 24 × 5 mm

Size 15 × 24 × 5 mm · single row deep groove ball bearing, 618 series (ultra-thin section). Dimensions are the same in every brand (ISO 15).

d 15D 24B 5
Dimensionsmminches
Bore (d)150.5906
Outside diameter (D)240.9449
Width (B)50.1969

How to read the number

68 = series · 02 = 15 mm bore (codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm).

Most common versions

VersionNumber
Open6802
Metal shields6802-2Z / ZZ
Rubber seals6802-2RS / 2RSH / DDU / LLU
Snap ring groove6802-N / NR
C3 clearance (motors)6802 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6802-2Z6802-2RSH
FAG / Schaeffler6802-2ZR6802-2RSR
NSK6802-ZZ6802-DDU
NTN6802-ZZ6802-LLU
Koyo6802-ZZ6802-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø15 j6 and housing Ø24 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 15 mm shaft? DIN 6885 calls for a 5 × 5 mm key →

Related bearings

Same bore (15 mm), other series: 6902 (15×28×7) · 6002 (15×32×9) · 6202 (15×35×11) · 6302 (15×42×13)

← 6801 (Previous in the series) · 6803 → (Next in the series)

Look up another bearing by number or size →