Bearings / 6300
6300 bearing — 10 × 35 × 11 mm
Size 10 × 35 × 11 mm · single row deep groove ball bearing, 63 series (heavy). Dimensions are the same in every brand (ISO 15).
| Dimensions | mm | inches |
|---|---|---|
| Bore (d) | 10 | 0.3937 |
| Outside diameter (D) | 35 | 1.378 |
| Width (B) | 11 | 0.4331 |
How to read the number
63 = series · 00 = 10 mm bore (codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm).
Most common versions
| Version | Number |
|---|---|
| Open | 6300 |
| Metal shields | 6300-2Z / ZZ |
| Rubber seals | 6300-2RS / 2RSH / DDU / LLU |
| Snap ring groove | 6300-N / NR |
| C3 clearance (motors) | 6300 C3 |
- Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
- Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
- C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.
Brand equivalents
| Brand | With metal shields | With rubber seals |
|---|---|---|
| SKF | 6300-2Z | 6300-2RSH |
| FAG / Schaeffler | 6300-2ZR | 6300-2RSR |
| NSK | 6300-ZZ | 6300-DDU |
| NTN | 6300-ZZ | 6300-LLU |
| Koyo | 6300-ZZ | 6300-2RS |
Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.
Shaft and housing fit
Most common case, inner ring rotating with the shaft under normal load: shaft Ø10 j6 and housing Ø35 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.
Keyed 10 mm shaft? DIN 6885 calls for a 3 × 3 mm key →
Related bearings
Same bore (10 mm), other series: 6800 (10×19×5) · 6900 (10×22×6) · 6000 (10×26×8) · 6200 (10×30×9)
· 6301 → (Next in the series)