Bearings / 6900
6900 bearing — 10 × 22 × 6 mm
Size 10 × 22 × 6 mm · single row deep groove ball bearing, 619 series (thin section). Dimensions are the same in every brand (ISO 15).
| Dimensions | mm | inches |
|---|---|---|
| Bore (d) | 10 | 0.3937 |
| Outside diameter (D) | 22 | 0.8661 |
| Width (B) | 6 | 0.2362 |
How to read the number
69 = series · 00 = 10 mm bore (codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm).
Most common versions
| Version | Number |
|---|---|
| Open | 6900 |
| Metal shields | 6900-2Z / ZZ |
| Rubber seals | 6900-2RS / 2RSH / DDU / LLU |
| Snap ring groove | 6900-N / NR |
| C3 clearance (motors) | 6900 C3 |
- Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
- Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
- C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.
Brand equivalents
| Brand | With metal shields | With rubber seals |
|---|---|---|
| SKF | 6900-2Z | 6900-2RSH |
| FAG / Schaeffler | 6900-2ZR | 6900-2RSR |
| NSK | 6900-ZZ | 6900-DDU |
| NTN | 6900-ZZ | 6900-LLU |
| Koyo | 6900-ZZ | 6900-2RS |
Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.
Shaft and housing fit
Most common case, inner ring rotating with the shaft under normal load: shaft Ø10 j6 and housing Ø22 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.
Keyed 10 mm shaft? DIN 6885 calls for a 3 × 3 mm key →
Related bearings
Same bore (10 mm), other series: 6800 (10×19×5) · 6000 (10×26×8) · 6200 (10×30×9) · 6300 (10×35×11)
· 6901 → (Next in the series)