Bearings / 6306
6306 bearing — 30 × 72 × 19 mm
Size 30 × 72 × 19 mm · single row deep groove ball bearing, 63 series (heavy). Dimensions are the same in every brand (ISO 15).
| Dimensions | mm | inches |
|---|---|---|
| Bore (d) | 30 | 1.1811 |
| Outside diameter (D) | 72 | 2.8346 |
| Width (B) | 19 | 0.748 |
How to read the number
63 = series · 06 × 5 = 30 mm bore.
Most common versions
| Version | Number |
|---|---|
| Open | 6306 |
| Metal shields | 6306-2Z / ZZ |
| Rubber seals | 6306-2RS / 2RSH / DDU / LLU |
| Snap ring groove | 6306-N / NR |
| C3 clearance (motors) | 6306 C3 |
- Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
- Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
- C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.
Brand equivalents
| Brand | With metal shields | With rubber seals |
|---|---|---|
| SKF | 6306-2Z | 6306-2RSH |
| FAG / Schaeffler | 6306-2ZR | 6306-2RSR |
| NSK | 6306-ZZ | 6306-DDU |
| NTN | 6306-ZZ | 6306-LLU |
| Koyo | 6306-ZZ | 6306-2RS |
Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.
Shaft and housing fit
Most common case, inner ring rotating with the shaft under normal load: shaft Ø30 k5 and housing Ø72 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.
Keyed 30 mm shaft? DIN 6885 calls for a 8 × 7 mm key →
Related bearings
Same bore (30 mm), other series: 6806 (30×42×7) · 6906 (30×47×9) · 6006 (30×55×13) · 6206 (30×62×16)
← 6305 (Previous in the series) · 6307 → (Next in the series)