Piñonario Power transmission toolsES

Bearings / 6307

6307 bearing — 35 × 80 × 21 mm

Size 35 × 80 × 21 mm · single row deep groove ball bearing, 63 series (heavy). Dimensions are the same in every brand (ISO 15).

d 35D 80B 21
Dimensionsmminches
Bore (d)351.378
Outside diameter (D)803.1496
Width (B)210.8268

How to read the number

63 = series · 07 × 5 = 35 mm bore.

Most common versions

VersionNumber
Open6307
Metal shields6307-2Z / ZZ
Rubber seals6307-2RS / 2RSH / DDU / LLU
Snap ring groove6307-N / NR
C3 clearance (motors)6307 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6307-2Z6307-2RSH
FAG / Schaeffler6307-2ZR6307-2RSR
NSK6307-ZZ6307-DDU
NTN6307-ZZ6307-LLU
Koyo6307-ZZ6307-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø35 k5 and housing Ø80 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 35 mm shaft? DIN 6885 calls for a 10 × 8 mm key →

Related bearings

Same bore (35 mm), other series: 6807 (35×47×7) · 6907 (35×55×10) · 6007 (35×62×14) · 6207 (35×72×17)

← 6306 (Previous in the series) · 6308 → (Next in the series)

Look up another bearing by number or size →