Piñonario Power transmission toolsES

Bearings / 6006

6006 bearing — 30 × 55 × 13 mm

Size 30 × 55 × 13 mm · single row deep groove ball bearing, 60 series (light). Dimensions are the same in every brand (ISO 15).

d 30D 55B 13
Dimensionsmminches
Bore (d)301.1811
Outside diameter (D)552.1654
Width (B)130.5118

How to read the number

60 = series · 06 × 5 = 30 mm bore.

Most common versions

VersionNumber
Open6006
Metal shields6006-2Z / ZZ
Rubber seals6006-2RS / 2RSH / DDU / LLU
Snap ring groove6006-N / NR
C3 clearance (motors)6006 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF6006-2Z6006-2RSH
FAG / Schaeffler6006-2ZR6006-2RSR
NSK6006-ZZ6006-DDU
NTN6006-ZZ6006-LLU
Koyo6006-ZZ6006-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø30 k5 and housing Ø55 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 30 mm shaft? DIN 6885 calls for a 8 × 7 mm key →

Related bearings

Same bore (30 mm), other series: 6806 (30×42×7) · 6906 (30×47×9) · 6206 (30×62×16) · 6306 (30×72×19)

← 6005 (Previous in the series) · 6007 → (Next in the series)

Look up another bearing by number or size →