Piñonario Power transmission toolsES

Bearings / 606

606 bearing — 6 × 17 × 6 mm

Size 6 × 17 × 6 mm · single row deep groove ball bearing, miniature, 60 series. Dimensions are the same in every brand (ISO 15).

d 6D 17B 6
Dimensionsmminches
Bore (d)60.2362
Outside diameter (D)170.6693
Width (B)60.2362

How to read the number

60 = series · 6 = 6 mm bore (on miniature bearings the last digit is the bore).

Most common versions

VersionNumber
Open606
Metal shields606-2Z / ZZ
Rubber seals606-2RS / 2RSH / DDU / LLU
Snap ring groove606-N / NR
C3 clearance (motors)606 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF606-2Z606-2RSH
FAG / Schaeffler606-2ZR606-2RSR
NSK606-ZZ606-DDU
NTN606-ZZ606-LLU
Koyo606-ZZ606-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø6 j6 and housing Ø17 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Related bearings

Same bore (6 mm), other series: 626 (6×19×6) · 636 (6×22×7)

← 605 (Previous in the series) · 607 → (Next in the series)

Look up another bearing by number or size →