Piñonario Power transmission toolsES

Bearings / 608

608 bearing — 8 × 22 × 7 mm

Size 8 × 22 × 7 mm · single row deep groove ball bearing, miniature, 60 series. Dimensions are the same in every brand (ISO 15).

d 8D 22B 7
Dimensionsmminches
Bore (d)80.315
Outside diameter (D)220.8661
Width (B)70.2756

How to read the number

60 = series · 8 = 8 mm bore (on miniature bearings the last digit is the bore).

Most common versions

VersionNumber
Open608
Metal shields608-2Z / ZZ
Rubber seals608-2RS / 2RSH / DDU / LLU
Snap ring groove608-N / NR
C3 clearance (motors)608 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF608-2Z608-2RSH
FAG / Schaeffler608-2ZR608-2RSR
NSK608-ZZ608-DDU
NTN608-ZZ608-LLU
Koyo608-ZZ608-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø8 j6 and housing Ø22 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 8 mm shaft? DIN 6885 calls for a 2 × 2 mm key →

Related bearings

Same bore (8 mm), other series: 628 (8×24×8) · 638 (8×28×9)

← 607 (Previous in the series) · 609 → (Next in the series)

Look up another bearing by number or size →