Piñonario Power transmission toolsES

Bearings / 609

609 bearing — 9 × 24 × 7 mm

Size 9 × 24 × 7 mm · single row deep groove ball bearing, miniature, 60 series. Dimensions are the same in every brand (ISO 15).

d 9D 24B 7
Dimensionsmminches
Bore (d)90.3543
Outside diameter (D)240.9449
Width (B)70.2756

How to read the number

60 = series · 9 = 9 mm bore (on miniature bearings the last digit is the bore).

Most common versions

VersionNumber
Open609
Metal shields609-2Z / ZZ
Rubber seals609-2RS / 2RSH / DDU / LLU
Snap ring groove609-N / NR
C3 clearance (motors)609 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF609-2Z609-2RSH
FAG / Schaeffler609-2ZR609-2RSR
NSK609-ZZ609-DDU
NTN609-ZZ609-LLU
Koyo609-ZZ609-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø9 j6 and housing Ø24 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 9 mm shaft? DIN 6885 calls for a 3 × 3 mm key →

Related bearings

Same bore (9 mm), other series: 629 (9×26×8) · 639 (9×30×10)

← 608 (Previous in the series)

Look up another bearing by number or size →