Bearings / 638
638 bearing — 8 × 28 × 9 mm
Size 8 × 28 × 9 mm · single row deep groove ball bearing, miniature, 63 series. Dimensions are the same in every brand (ISO 15).
| Dimensions | mm | inches |
|---|---|---|
| Bore (d) | 8 | 0.315 |
| Outside diameter (D) | 28 | 1.1024 |
| Width (B) | 9 | 0.3543 |
How to read the number
63 = series · 8 = 8 mm bore (on miniature bearings the last digit is the bore).
Most common versions
| Version | Number |
|---|---|
| Open | 638 |
| Metal shields | 638-2Z / ZZ |
| Rubber seals | 638-2RS / 2RSH / DDU / LLU |
| Snap ring groove | 638-N / NR |
| C3 clearance (motors) | 638 C3 |
- Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
- Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
- C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.
Brand equivalents
| Brand | With metal shields | With rubber seals |
|---|---|---|
| SKF | 638-2Z | 638-2RSH |
| FAG / Schaeffler | 638-2ZR | 638-2RSR |
| NSK | 638-ZZ | 638-DDU |
| NTN | 638-ZZ | 638-LLU |
| Koyo | 638-ZZ | 638-2RS |
Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.
Shaft and housing fit
Most common case, inner ring rotating with the shaft under normal load: shaft Ø8 j6 and housing Ø28 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.
Keyed 8 mm shaft? DIN 6885 calls for a 2 × 2 mm key →
Related bearings
Same bore (8 mm), other series: 608 (8×22×7) · 628 (8×24×8)