Piñonario Power transmission toolsES

Bearings / 637

637 bearing — 7 × 26 × 9 mm

Size 7 × 26 × 9 mm · single row deep groove ball bearing, miniature, 63 series. Dimensions are the same in every brand (ISO 15).

d 7D 26B 9
Dimensionsmminches
Bore (d)70.2756
Outside diameter (D)261.0236
Width (B)90.3543

How to read the number

63 = series · 7 = 7 mm bore (on miniature bearings the last digit is the bore).

Most common versions

VersionNumber
Open637
Metal shields637-2Z / ZZ
Rubber seals637-2RS / 2RSH / DDU / LLU
Snap ring groove637-N / NR
C3 clearance (motors)637 C3
  • Metal shields on both sides (2Z / ZZ). Greased for life; keep out coarse dirt with no drag, good for high rpm.
  • Rubber seals on both sides (2RS / DDU / LLU). Greased for life; best protection against fine dust and water, with slightly more drag and lower max rpm than shields.
  • C3: internal clearance greater than normal. For tight fits or high temperature; very common in electric motors.

Brand equivalents

BrandWith metal shieldsWith rubber seals
SKF637-2Z637-2RSH
FAG / Schaeffler637-2ZR637-2RSR
NSK637-ZZ637-DDU
NTN637-ZZ637-LLU
Koyo637-ZZ637-2RS

Usual designations of each manufacturer; the size is the same in all of them. Check the brand's catalog.

Shaft and housing fit

Most common case, inner ring rotating with the shaft under normal load: shaft Ø7 j6 and housing Ø26 H7. If the outer ring rotates (wheels, idler pulleys) it is reversed: shaft g6 or h6 and housing M7 or N7. Check the manufacturer's catalog for heavy loads or high temperatures.

Keyed 7 mm shaft? DIN 6885 calls for a 2 × 2 mm key →

Related bearings

Same bore (7 mm), other series: 607 (7×19×6) · 627 (7×22×7)

← 636 (Previous in the series) · 638 → (Next in the series)

Look up another bearing by number or size →